I always hear the suggestions of using "glancing blows" on the cymbals, and it sounds like nice advice, but in my experience, that's not how pros really hit them. I just watched some Vinnie C and Steve Smith videos to reinforce that stance, and what I saw backed up my assertion.

I just think that advice mostly comes from some cymbal company's marketing people, hoping to minimize the amount of returns they get. If you play hard, you will occasionally break cymbals - there's no real way around it.

Rather than trying to hit cymbals with sweeping side to side motions, I instead suggest that you put a lot of thought into the height, angle, mounting, and position of your cymbals. If your stick is hitting at an angle nearly perpendicular to the edge of the cymbal, you're going to do a lot more damage. Try to angle them so that your stick hits the cymbal's edge at only a slight angle.

Mount the cymbal loosely, so that it can move when you hit it.

And don't overplay a cymbal - most of them have a finite volume range, and if you hit them harder than what is required to reach that volume level, you'll get no increase in volume, will actually get a harsher, less pleasant cymbal sound, and will be greatly decreasing the life of the cymbal.

In the pros, most rock, pop, and country drummers hit pretty hard. And most of them occasionally break cymbals. Like a drumhead or a stick, a cymbal - particularly a crash, china, or splash - can be thought of as a finite resource. It can get used up eventually, and will need to be replaced. By approaching the way you choose them, set them up, and play them with a LOT of thought, you can maximize their life expectancy.

But skip the glancing blows, unless you just think they look cool. Hell, most trained drummers work for years on their snare drum technique to AVOID glancing blows. Just my opinion.


Mr. A.

I have broken 2 crashes and 1 splash in my long storied career. I can remember placing the cymbals horizontal to the ground because that the way alot of drummers had them. This puts the shoulder of the stick on the edge of the cymbal  making a really loud crash, and puts alot of stress on one little point on the cymbal. It's no wonder they cracked.
I have not broken a cymbal in 20 years. Part of this is I am not playing in a rock and roll band. Also I have my cymbals at an angle which gives me more options for where to hit the crash, rather than only on the edge. And when i crash it with the side of the stick along the side (bow) of the cymbal it spreads the force over a greater area.

right on Mr A!  especially on the looser cymbals point,  i played my friend's set and his cymbals were tighter than my drumheads!  he asked me if i could figure out why he kept breaking cymbals   !  

i like to keep my cymbals down low, mainly because i use everything as rides, but it gives the added benefit of keeping my cymbals safe.  i can't smash the edges.  for a crash, i have to hit near the edge with the tip of a stick.

I have varying ways that I hit my cymbals.If I am playing a hard rock beat I whack em.How can you not? If I playing laid back and very groove oriented I glide my stick across the egde.Then again its a completely different sound and feel.I have broken cymbals,I don't know many drummers who havn't broken at least 1 cymbal in their drumming career.I did however know one drummer who always broke his Hi-hats.Now that kid was a hard hitter.Every show the band I am did with his band he always had all new cymbals.He went though cymbals like people go through gas for their cars.Always getting more.And in my tenure of using Sabians which has been the past 3 years I have only broken 2 new cymbals ( and that was after about a year and a half of everyday use on each ) reinstating once again...Love my Sabian's..  

I have managed this technique to a degree.I am not a professional at it but when I hit the cymabl its not a complete follow through technique.Its not like golf where I have to follow through with the swing.Its more and forward and as I am going forward I am already going back technique.

That and you have to get it quicky back to the snare/hats/ride/toms whatever is after the cymbal.

I'm from the john bonham cymbal school where he said "drums always sound better than cymbals"

I usually tend to underplay my cymbals when I crash while playing my drums MUCH firmer.  It's a better sound to me.  I also underplay may hats  That is a peeve for me to never have the cymbals overbearing.  The trick is to get the "mix" just right.

woah, you got the Lang DVD already?  oi..  been waiting for that one for a LONG while.

Mr. Acrolite - I agree completely.
 
I think your gear should work for you, not vice versa.

 If you pick your cymbals to match your style of music, they should last for a good while.  Eventually,  however,  a crash will break, due to metal fatigue.  I've had crashes that died in two years, and one that lasted almost twenty.

The idea that I'm supposed to devote my playing technique to the preservation of a cymbal is absurd.   I personally would rather devote my technique to making music as well as I can.

Typically, I hit a crash just hard enough to get the sound I want.  I do edge the cymbal.  Cymbals struck on the bow don't sound very good.

If a cymbal dies once in a while during this process,  so be it.

Felix is right.  Getting the mix right is the top goal in my book, and it does start with the drummer, even before any sound hits the mic's.  I used to read MIX Magazine religiously (every week on sunday?)  and I would study any info I could find about sound engineering and producing, and I often heard engineers and/or drummers say that in the studio it helps to hit the drums a little harder, and the cymbals a little softer --- the mix improves a lot before any faders need to be adjusted at the board, and less radical EQ is necessary if the cymbal volume is not off the wall.  

Combine that with the fact that cymbals do cut thru the mix very well, and may be pretty loud out in the house, out in the audience, or on the tape.   For glancing blows on the cymbals, practice doing an "L" shape (or backward L for the left hand) and it goes a long way.  It looks cool too, I recall fondly watching early MTV videos of Rainbow, Deep Purple, Dio, Whitesnake, Michael Schenker, or whatever other incarnation of the Purple was popular back then in the tumultuous 80's, it all blurs for me now.... but the drummer in question, was Cozy Powell, and he would give a nice twist of the wrist after hitting the cymbal in songs like "All Night Long" or 'Can't Happen Here".   I always strove to sound and look that cool.  The jury is still out.

Another tip... when someone looks like they hit a cymbal straight on, they may in fact be "pulling their punches" if you know what I mean... the strike may be measured, stopping short at the point of impact and pulling back.  The same way a jewel thief might punch "up to" the glass, breaking it, but not "through" the glass, which would cut him and require hospitalization.  Knowing where the point of impact is and pulling back right at it is a learned art.  

If you have nothing to do tonight, and want a way to practice this "pulling back at point of impact", tie a knot in the end of a 2 foot rope, hang a cymbal on it, hanging off of a stand... practice hitting it right on repeatedly, just enough to make a sound, and rebound quick---help the rebound a bit yourself.  Hit the cymbal just hard enough to make a nice sound, but not enough to make it go loop-de-loo'ing around the stand.  When you get it right, and can achieve a few hits in a quick succession repeatedly, it sounds nice.  If you miss the third or fourth hit because the cymbal moved, and the stick flew out of your hand because you were holding it so loosely, I think you got it!