Topic: Octobans  (Read 5010 times)

0 Members and 1 Guest are viewing this topic.

Offline pushkin

  • Copper Member
  • Posts: 1
Octobans
« on: May 21, 2008, 09:35 PM »
Can you Tell me How the Octobans are Made.
                                                        yours
                                                       pushkin

Offline Bob Dias

  • Cafe VIP
  • Posts: 510
  • mmmmm...staves
    • Ugly Rumor
Re: Octobans
« Reply #1 on: May 21, 2008, 09:53 PM »
Pushkin,
First off, welcome to the single best Drummer-oriented website/community in cyberville!


Octobans...hmmm. I can't help you there.  Due to their generally narrow diameter, they are generally made from acrylic, fiberglass or metal.  I suppose they can be made from standard ply-type shells also.  But I have never made any, nor even inspected some up close. Any one want to help me out here?

I know this does not help much, but I suspect that if you can get some small diameter/long length keller-type shells from Drummaker.com or other on-line supplier, along with lugs, heads and rims, you would be well on your way.

Cheers, Bob
"It's O.K. if you only know three chords, but for God's sake, play'em in the right order" (H. Hill)

Offline Todd Norris

  • Cafe VIP
  • Posts: 2144
  • Psalm 150:5
    • Fusion Drums
Re: Octobans
« Reply #2 on: May 21, 2008, 10:57 PM »
I'd probably by some 6" PVC and cut it into lengths and fit with lugs and mounting hardware. 

Timekeep69

  • Guest
Re: Octobans
« Reply #3 on: May 26, 2008, 05:18 PM »
Make sure that the PVC is 6" OD (outside diameter).

RhythmStop

  • Guest
Re: Octobans
« Reply #4 on: June 04, 2008, 02:30 AM »
I owned a set and if they were made of PVC, then they just had a really strange coating/finish on them because it was a very rough that honestly felt like some strange futuristic combination of metal and plastic...
PVC would still probably sound really awesome anyway though.

Offline DrumnDad

  • Cafe VIP
  • Posts: 269
  • Drums -- they make life more fun.
Re: Octobans - how to make you own
« Reply #5 on: October 18, 2008, 10:59 PM »
Here is a link to make your own octobans:
 http://www.arrickrobotics.com/tubetoms.html]http://www.arrickrobotics.com/tubetoms.html

Doug
The older I get, the simpler I play.

Danno

  • Guest
Re: Octobans - how to make you own
« Reply #6 on: October 25, 2008, 06:03 PM »
Here is a link to make your own octobans:
 http://www.arrickrobotics.com/tubetoms.html]http://www.arrickrobotics.com/tubetoms.html

Doug


Wow.

I didn't even know what octobans were. That is a REALLY COOL website.

Offline Jon E

  • Cafe VIP
  • Posts: 3595
  • Gaaaah!
    • Things Very Special
Re: Octobans
« Reply #7 on: October 25, 2008, 09:53 PM »
Back in the 80's there was another company making these called Dragon Drums.  the only real difference is that theirs wre cut at an angle at the open end.

http://www.billbruford.com/equipment/image037.jpg




 

Drummer Cafe RSS Feeds Drummer Cafe on Twitter Drummer Cafe on Facebook Drummer Cafe on YouTube Drummer Cafe on Pinterest Drummer Cafe on Instagram