Topic: Making a Snare Drum  (Read 3663 times)

0 Members and 1 Guest are viewing this topic.

Adam Wedgewood

  • Cafe VIP
  • Posts: 74
Making a Snare Drum
« on: June 06, 2012, 06:32 PM »
I am thinking about rolling myself a snare drum!  I work in a sheet metal fabrication shop and have all the equipment.  I could buy a piece of brass 40" x 6" and stitch weld it closed.  I could smooth off the edges of the weld, put a few creases it in with other machines.  We have another machine that can make it perfectly round.  Then I could bevel the edges, drill holes and buy the hardware.   I am considering this undertaking but have no idea what to expect.  I could get the stock metal for pretty cheap too, including a lot of free steel so I could do this again and again I suppose. 

Chip Donaho

  • Cafe VIP
  • Posts: 3647
Re: Making a Snare Drum
« Reply #1 on: June 07, 2012, 10:10 PM »
I have a Mapex "Phosphor Bronze" snare. I don't know about making your own, but it sounds awesome.   ;)

Mister Acrolite

  • Cafe VIP
  • Posts: 5936
  • I'm not bald; I'm aerodynamic.
    • k e i t h c r o n i n . c o m
Re: Making a Snare Drum
« Reply #2 on: June 08, 2012, 01:37 PM »
Go for it, and let us know how it comes out!

Todd Norris

  • Cafe VIP
  • Posts: 2143
  • Psalm 150:5
    • Fusion Drums
Re: Making a Snare Drum
« Reply #3 on: June 09, 2012, 07:32 PM »
I second Mr. Acrolite's sentiment!

Bart Elliott

  • Super Admin
  • Posts: 15094
  • Founder & Owner of
    • bartelliott
    • bartelliott
    • w w w . B a r t E l l i o t t . c o m
Re: Making a Snare Drum
« Reply #4 on: June 09, 2012, 10:14 PM »
I third it!

Bob Dias

  • Cafe VIP
  • Posts: 510
  • mmmmm...staves
    • Ugly Rumor
Re: Making a Snare Drum
« Reply #5 on: July 06, 2012, 11:17 AM »
Do it! and take pics along the way! I would love to see it done from raw metal to completion.  bob.


Drummer Cafe on Twitter Drummer Cafe on Facebook Drummer Cafe on YouTube Drummer Cafe on Pinterest Drummer Cafe on Instagram